First things first, make sure you have Diablo 2 installed.

_ _

1. Right click the Diablo 2 icon
2. Left click Properties
3. Click Compatibility
4. Check the checkbox “Run this program in compatibility for” and select: Windows XP (Service Pack 3)
5. Check run in 256 colors
6. Check Disable Desktop Composition
7. Check Run this Program as Administrator (this will by-pass any User Account Control issues)
8. Click Ok
9. Now open Diablo 2 (it should now run)

Note: It has also been reported that setting up and adding your Diablo 2 keys to Battle.net will allow you to download a client from Blizzard that will run fine.

1. Open Finder
2. Navigate to: Users/YourUser/NameHere/Library/Preferences
3. Warning: Be mindful of changing the wrong file or touching incorrect settings in this folder. This could go wrong!
4. Open: com.apple.bezelservice.plist
5. Change kHWMin to have a value of: 1
6. Close and save

_You have now adjusted the minimum light the light sensor needs to activate the back-light on the keyboard. _

Note: Only valid for Macbook Pros, normal Macbooks do not contain keyboard back-lights.

Warning: Resetting the PRAM/NVRAM will cause the Mac to lose operating system settings such as Time and Volume settings.

Note: Used successfully to fix Touchpad not “clicking” issue on a Macbook Pro

1. Make sure the Mac is turned off
2. Press Command+Option+P+R and hold down the keys
3. Press the Power Button on the Mac (while still pressing the keys down)
4. The Mac will then flash and restart, release the keys once you have reached the second start-up noise.
5. You have now reset the settings and your Mac should continue booting.

** **

** **

Want to get emailed disk status reports of your drives/hard drives and you are using a Windows PC? Using a great tool developed by Acronis you can. Acronis Drive Monitor runs down in the notification tray (by the time) and monitors your hard drive(s) temperature/spin time and sector failure rate giving you a good indication of when/if they are going to fail before they do. If you are away from the computer or simply would rather get status reports emailed to you, this is how you do it.

1. First things first download Acronis Drive Monitor
2. Install Acronis Drive Monitor
3. Down by the notification tray you will see a little icon of a hard drive, double click it.
4. To view the status of your disks click “Show Disks” you will get an overview on the drive(s) health, clicking on S.M.A.R.T parameters gives you more of an advanced look.
5. Click Options (up the top of Acronis Disk Monitor)
6. On the Alerts tab, click “change settings”
7. Type in the email address you would like them sent to you can have multiple addresses by separated them with a semicolon.
8. Type in the from field who you want them sent from (ie Home Computer)
9. For the outgoing mail server settings you have to type the outgoing mail settings for the email account you wish to use to send from, the easiest way is to check your mail client for the ones used there and copy them in.
10. Click Sent Test Message to email a test email to the email address you specified above. Once it has been setup click Ok.
11. Now you can select to be either emailed about Critical Events (which stops email spamming in your inbox) or you can either have regular disk status reports sent (for a Windows server it is probably better for this to be selected so then you can go back and have a look at drive status if needed.
12. Congratulations you have just set up your computer to email hard drive alerts.

Note: One of the adjustments I make for my home computer, is to disable Backup alerts (under Backup Monitoring)

First off, you need a Raspberry Pi and an SD Card/Reader

1. Once obtained download Xbian
2. Once downloaded, make sure that the SD Card is blank or is safe to format and plugged in.
3. Extract Xbian to a folder on your computer
4. Run the Win32 Extractor and make sure you select the SD-Card as the correct destination.
5. Once selected press Run
6. The tool will then format (erase) everything on the SD-Card and overlay the Xbian software onto the card and make it bootable, it generally takes 1-2 minutes to complete.
7. Once completed make sure that nothing is writing to the SD-Card or has it open and take the card out.
8. Put the SD-Card into the Raspberry Pi (the slot is underneath the Pi)
9. Plug the Pi into power and attach it up to a TV/Monitor using HDMI and let it boot up Xbian.
10. As easy as that, you have now a fully functionally media centre.

Note: Xbian automatically boots NTFS/FAT32 External HDDs, however make sure that the external HDD has its own power source the Pi doesn’t have enough juice to pump through to drives that only have one USB cable for both power and data.

_Note: To add Videos, click Add Videos, Add Files, Add Source, select the folder that contains the video files it is entirely normal for no videos to appear in this dialog.  _