Skip to main content

Brother DCP-110C Waste Ink Counter Reset

· One min read

Resetting the DCP-110C Printer Waste Ink Counter is easy, follow the instructions below:

  1. Press the Menu & Mono start keys next press the Up arrow key 4 times to make the machine enter the maintenance mode.
  2. Enter 8 & 0 by using the up arrow key & SET keys.
  3. Press the mono start key several times until the purge count appears on the LCD.
  4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero
  5. Press the stop/exit key to return to the initial stage of the maintenance mode.
  6. Enter 9 twice by using the up arrow & set key’s to exit from maintenance mode
  7. Restart printer