My Profile Photo

luke.geek.nz


An IT Engineer with a love for all things IT including (but not limited to), Microsoft Azure, Automation and Service Management!


  1. Brother HL-2040 Paper Light Blinking On/Off

    This problem usually occurs due to a Paper Jam in the printer or a faulty Drum unit in the printer. Follow any of the instructions below that matches your problems. Printing In your word document/or document you are trying to print Go to File Page Setup Paper Make sure that your paper source is set to Tray 1 or what Tray the correct paper is in. Reinstalling Toner Take off the front cover Pull the...…


  2. Brother HL-140 Drum Light is on

    Trying to print with your HL-140 and the Drum light is on? Follow the instructions below. Reset the Drum Press the cover release button and then open the front cover of the printer. Press & hold down the Go button until all 4 LEDs are lit. Once all 4 LEDs are lit, release the Go button. Close the front cover. Make sure that the Drum LED is now off. Caution: Reset the drum counter only...…


  3. Brother DCP-110C Waste Ink Counter Reset

    Resetting the DCP-110C Printer Waste Ink Counter is easy, follow the instructions below: Press the Menu & Mono start keys next press the Up arrow key 4 times to make the machine enter the maintenance mode. Enter 8 & 0 by using the up arrow key & SET keys. Press the mono start key several times until the purge count appears on the LCD. Enter 2 7 8 & 3 by using the up arrow...…


  4. Brother 5860CN Change Unable 30 Error Fix

    The problem usually occurs when the Encoder strip a think plastic strip falls out of its guide inside the printer. Here is how to fix it:  Lift scanner cover and remove the two plastic panels covering wires. Mark down position of cables then remove them, and remove the now-freed top scanner section entirely  Remove screws from top plastic shell (There’s two in the back and four in the front, there’s also two plastic tabs in...…


  5. BOOTMGR Errors Windows Vista/Windows 7

    A few BOOTMGR Fixes for those having problems with Windows 7 /Vista startup. BOOTMGR is compressed.  Boot from the Vista DVD. Click ‘Repair my Computer‘ At the prompt to select your OS installation, click the button that says ‘Load Drivers‘. This should bring up a explorer-style drive browser. Then just right-click on the drive you tried to compress, and deselect ‘Compress this Drive’ which should still be ticked on. Hit Apply & Apply to subfolders/files. Reboot...…