My Profile Photo

luke.geek.nz


An IT Engineer with a love for all things IT including (but not limited to), Microsoft Azure, Automation and Service Management!


Brother HL-140 Drum Light is on

Trying to print with your HL-140 and the Drum light is on? Follow the instructions below.

Reset the Drum

  1. Press the cover release button and then open the front cover of the printer.
  2. Press & hold down the Go button until all 4 LEDs are lit. Once all 4 LEDs are lit, release the Go button.
  3. Close the front cover.
  4. Make sure that the Drum LED is now off.

Caution: Reset the drum counter only when you replaced the drum unit with a new one.

comments powered by Disqus